-
Signs of leaking in your attic.
-
Signs of water damage in your house (water stains,
blistering & peeling paint on ceilings).
-
Sunlight that can be seen through your roof.
-
Blistered, curled or cracked shingles.
-
Loose or missing shingles.
-
Exposed nails in your roof.
-
Dark, dirty-looking patches on your roof.
-
Sagging on the center of the roof.
-
Rusty flashing.
-
Low energy efficiency in your home.
Commonly
asked questions about roof repair* |
Q:
How can a home owner recognize when a roof system has problems?
A: All too often, roof system problems are discovered
after leaking or other serious damage occurs. Periodic (twice-a-year)
inspections often can uncover cracked, warped or missing shingles; loose
seams and deteriorated flashings; excessive surface granules accumulating
in the gutters or downspouts; and other visible signs of roof system
problems. Indoors, look for cracked paint, discolored plasterboard and
peeling wallpaper as signs of damaged roof areas.
Q:
What are my options if I decide to reroof?
A: You have two basic options: You can choose a
complete replacement of the roof system, involving a tear-off of your
existing roof system, or re-cover the existing roof system, involving
only the installation of a new roof system. If you've already had one
re-cover installed on your original roof system, check with a professional
roofing contractor. In many instances, building code requirements allow
no more than one roof system re-cover before a complete replacement
is necessary.
Q:
My roof leaks. Do I need to have it replaced completely?
A: Not necessarily. Leaks can result from flashings
that have come loose or a section of the roof system being damaged.
A complete roof system failure, however, generally is irreversible and
a result of improper installation or choice of materials or the roof
system installation is inappropriate for the home or building.
Q:
Can I do the work myself?
A: Most work should not be done yourself. Professional
roofing contractors are trained to safely and efficiently repair or
replace roof systems. You can damage your roof system by using improper
roofing techniques and severely injure yourself by falling off or through
the roof.
Maintenance performed by home and building owners
should be confined to inspecting roof systems during the fall and spring
to check for cracked or curling shingles and cleaning gutters filled
with dead leaves and other debris. If you must inspect your roof system
yourself, use a firmly braced or tied-off ladder equipped with rubber
safety feet. Wear rubber-soled shoes and stay on the ladder (and off
the roof system), if possible.
Q:
How long can I expect my roof system to last?
A: Most new roof systems are designed to provide
useful service for about 20 years. Some roof system types, such as slate,
clay tile and certain metal (e.g., copper) systems, can last longer.
Actual roof system life span is determined by a
number of factors, including local climatic and environmental conditions,
proper building and roof system design, material quality and suitability,
proper application and adequate roof maintenance.
Q:
What affects my roof’s performance*?
* Sun: Heat and ultraviolet
rays cause roofing materials to deteriorate over time. Deterioration
can occur faster on the sides facing west or south.
* Rain: When water gets
underneath shingles, shakes or other roofing materials, it can work
its way to the roof deck and cause the roof structure to rot. Extra
moisture encourages mildew and rot elsewhere in a house, including walls,
ceilings, insulation and electrical systems.
* Wind: High winds can
lift shingles' edges (or other roofing materials) and force water and
debris underneath them. Extremely high winds can cause extensive damage.
* Snow and ice: Melting
snow often refreezes at a roof's overhang where the surface is cooler,
forming an ice dam. This blocks proper drainage into the gutter. Water
backs up under the shingles (or other roofing materials) and seeps into
the interior. During the early melt stages, gutters and downspouts can
be the first to fill with ice and be damaged beyond repair or even torn
off a house or building.
* Condensation: Condensation
can result from the buildup of relatively warm, moisture-laden air.
Moisture in a poorly ventilated attic promotes decay of wood sheathing
and rafters, possibly destroying a roof structure. Sufficient attic
ventilation can be achieved by installing larger or additional vents
and will help alleviate problems because the attic air temperature will
be closer to the outside air temperature.
* Moss and algae: Moss
can grow on moist wood shingles and shakes. Once it grows, moss holds
even more moisture to a roof system's surface, causing rot. In addition,
moss roots also can work their way into a wood deck and structure. Algae
also grows in damp, shaded areas on wood or asphalt shingle roof systems.
Besides creating a black-green stain, algae can retain moisture, causing
rot and deterioration. Trees and bushes should be trimmed away from
homes and buildings to eliminate damp, shaded areas, and gutters should
be kept clean to ensure good drainage.
* Trees and leaves: Tree
branches touching a roof will scratch and gouge roofing materials when
the branches are blown by the wind. Falling branches from overhanging
trees can damage, or even puncture, shingles and other roofing materials.
Leaves on a roof system's surface retain moisture and cause rot, and
leaves in the gutters block drainage.
* Missing or torn shingles:
The key to a roof system's effectiveness is complete protection. When
shingles are missing or torn off, a roof structure and home or building
interior are vulnerable to water damage and rot. The problem is likely
to spread-nearby shingles also are ripped easily or blown away. Missing
or torn shingles should be replaced as soon as possible.
* Shingle deterioration: When
shingles are old and worn out, they curl, split and lose their waterproofing
effectiveness. Weakened shingles easily are blown off, torn or lifted
by wind gusts. The end result is structural rot and interior damage.
A deteriorated roof system only gets worse with time-it should be replaced
as soon as possible.
* Flashing deterioration: Many
apparent roof leaks really are flashing leaks. Without good, tight flashings
around chimneys, vents, skylights and wall/roof junctions, water can
enter a home or building and cause damage to walls, ceilings, insulation
and electrical systems. Flashings should be checked as part of a biannual
roof inspection and gutter cleaning.
*Provided by the National Roofing Contractors Association.